|
|
| Standard
Specs |
|
| Overall Length |
94.3 in. (2395mm) |
| Overall
Width |
47.2 in. (1200
mm) |
Wheel Base
|
64.6 in. (1640 mm) |
| Min. Ground |
4.3 in. (110 mm) |
| Seating Capacity |
2 |
| Maximum
Speed |
12~15 mph (
19.3 ~ 24.1 km/h)
11.4 mph Reverse Speed
|
| Max. Turning Radius |
18.2 ft (2.8m) |
| Engine (DRIVE 4-Stroke
only) |
Type of Engine: Yamaha
low-emission, single-cylinder, overhead valve, four-stroke.
Total Displacement: 357
Output Rating: 11.4 HP @ 3500 RPM
Cooling System: Forced Cooling
Air Cleaner: Foam urethane pre-filter and automotive-type,
high capacity pleated paper cartridge.
Lubrication System: Splash |
| Electric
Motor/Speed Controller (DRIVE 48V only) |
Type of motor: Hitachi 48-Volt high-efficiency,
shunt-wound motor with internal solid-state tachometer.
Output Rating: 2.6 kw (3.5 HP) for 30 minutes.
Speed Controller: Yamaha-built solid-state micro-processor
with high-efficiency MOSFET switching. 270-amp armature
output, 20 amp field output.
|
|
| Additional Features
found on all DRIVE Models |
| Front Suspension/Steering |
Front: Yamaha's Tru-Trak II fully
independent automotive-style strut suspension.
Steering: Self-compensating double
reduction helical rack -and-pinion, permanently lubricated
with sealed, greasless tie-rod ends.
|
| Rear Suspension |
Rear: Unit swing arm with
coil springs over hydraulic shock absorbers. |
| Brakes |
Maintenance-free
internal transaxle disc brake. |
| Frame |
Hybricore
Chassis features a robotically welded automotive ladder-style
frame mated to a polypropylene structural floor. Frame
components are protected with a multi-step full-immersion
phosphate treatment, electrodeposition epxy-based coating,
and an electrostatically applied polyester/urethane
powder topcoat. |
| Seating |
Seamless, fabric-backed
vinyl bonded to pure, virgin foam contoured seat cushions
and mated to a warp and moisture resistant polypropylene
bottom, strengthened with plated steel inserts. |
| Body |
Custom formulated color
matched thermoplastic olefin, painted with a two part
topcoat of high luster automotive grade polyurethane. |
| Bumpers |
Yamaha's 5 mph energy absorbing
front and rear bumpers are the same height to minimize
damage to the body and the frame during a collision. |
| Warranty |
2009
Warranty PDF |
